Comparison of dredging, lanthanum-modified bentonite, aluminium-modified zeolite, and FeCl2 in controlling internal nutrient loading.

The eutrophic Bouvigne pond (Breda, The Netherlands) regularly suffers from cyanobacterial blooms. To improve the water quality, the external nutrient loading and the nutrient release from the pond sediment have to be reduced. An enclosure experiment was performed in the pond between March 9 and July 29, 2020 to compare the efficiency of dredging, addition of the lanthanum-modified bentonite clay Phoslock® (LMB), the aluminum-modified zeolite Aqual-P™ (AMZ) and FeCl2 to mitigate nutrient release from the sediment. The treatments improved water quality. Mean total phosphorus (TP) concentrations in water were 0.091, 0.058, 0.032, 0.031, and 0.030 mg P L-1 in controls, dredged, FeCl2, LMB and AMZ treated enclosures, respectively. Mean filterable P (FP) concentrations were 0.056, 0.010, 0.009, 0.005, and 0.005 mg P L-1 in controls, dredged, FeCl2, LMB and AMZ treatments, respectively. Total nitrogen (TN) and dissolved inorganic nitrogen (DIN) were similar among treatments; lanthanum was elevated in LMB treatments, Fe and Cl in FeCl2 treatments, and Al and Cl in AMZ treatments. After 112 days, sediment was collected from each enclosure, and subsequent sequential P extraction revealed that the mobile P pool in the sediments had reduced by 71.4%, 60.2%, 38%, and 5.2% in dredged, AMZ, LMB, and FeCl2 treatments compared to the controls. A sediment core incubation laboratory experiment done simultaneously with the enclosure experiment revealed that FP fluxes were positive in controls and cores from the dredged area, while negative in LMB, AMZ and FeCl2 treated cores. Dissolved inorganic nitrogen (DIN) release rate in LMB treated cores was 3.6 times higher than in controls. Overall, the applied in-lake treatments improved water quality in the enclosures. Based on this study, from effectiveness, application, stakeholders engagement, costs and environmental safety, LMB treatment would be the preferred option to reduce the internal nutrient loading of the Bouvigne pond, but additional arguments also have to be considered when preparing a restoration.

Unlocking the Potential of Magnetic Refrigeration: Investigating the Compatibility of the Ga-Based Liquid Metal with a La(Fe,Mn,Si)13Hz Magnetocaloric Material for Enhanced Long-Term Stability.

Magnetic refrigeration (MR) is a cutting-edge technology that promises high energy efficiency and eco-friendliness, making it an exciting alternative to traditional refrigeration systems. However, the main challenge to its widespread adoption is cost competitiveness. In this context, the use of liquid metals as heat transfer liquids in the MR has been proposed as a game-changing solution. Unfortunately, the toxicity and flammability of these liquid metals have raised serious concerns, limiting their practical use. In this study, we investigate the compatibility of a nontoxic and nonflammable GaInSn-based liquid metal with a magnetocaloric material, La(Fe,Mn,Si)13Hz, over a 1.5 year period. Our findings reveal nearly a 14% reduction in specific cooling energy and peak-specific isothermal magnetic entropy change for the considered magnetocaloric material. Our study provides valuable insights into the long-term stability of magnetocaloric materials and their compatibility with liquid metals, facilitating the development of more cost-effective and sustainable MR systems.

Stability of Colloidal Iron Oxide Nanoparticles on Titania and Silica Support.

Using model catalysts with well-defined particle sizes and morphologies to elucidate questions regarding catalytic activity and stability has gained more interest, particularly utilizing colloidally prepared metal(oxide) particles. Here, colloidally synthesized iron oxide nanoparticles (Fe x O y -NPs, size ∼7 nm) on either a titania (Fe x O y /TiO2) or a silica (Fe x O y /SiO2) support were studied. These model catalyst systems showed excellent activity in the Fischer-Tropsch to olefin (FTO) reaction at high pressure. However, the Fe x O y /TiO2 catalyst deactivated more than the Fe x O y /SiO2 catalyst. After analyzing the used catalysts, it was evident that the Fe x O y -NP on titania had grown to 48 nm, while the Fe x O y -NP on silica was still 7 nm in size. STEM-EDX revealed that the growth of Fe x O y /TiO2 originated mainly from the hydrogen reduction step and only to a limited extent from catalysis. Quantitative STEM-EDX measurements indicated that at a reduction temperature of 350 °C, 80% of the initial iron had dispersed over and into the titania as iron species below imaging resolution. The Fe/Ti surface atomic ratios from XPS measurements indicated that the iron particles first spread over the support after a reduction temperature of 300 °C followed by iron oxide particle growth at 350 °C. Mössbauer spectroscopy showed that 70% of iron was present as Fe2+, specifically as amorphous iron titanates (FeTiO3), after reduction at 350 °C. The growth of iron nanoparticles on titania is hypothesized as an Ostwald ripening process where Fe2+ species diffuse over and through the titania support. Presynthesized nanoparticles on SiO2 displayed structural stability, as only ∼10% iron silicates were formed and particles kept the same size during in situ reduction, carburization, and FTO catalysis.

Understanding and improving the reusability of phosphate adsorbents for wastewater effluent polishing.

Phosphate is a vital nutrient for life but its discharge from wastewater effluents can lead to eutrophication. Adsorption can be used as effluent polishing step to reduce phosphate to very low concentrations. Adsorbent reusability is an important parameter to make the adsorption process economically feasible. This implies that the adsorbent can be regenerated and used over several cycles without appreciable performance decline. In the current study, we have studied the phosphate adsorption and reusability of commercial iron oxide based adsorbents for wastewater effluent. Effects of adsorbent properties like particle size, surface area, type of iron oxide, and effects of some competing ions were determined. Moreover the effects of regeneration methods, which include an alkaline desorption step and an acid wash step, were studied. It was found that reducing the adsorbent particle size increased the phosphate adsorption of porous adsorbents significantly. Amongst all the other parameters, calcium had the greatest influence on phosphate adsorption and adsorbent reusability. Phosphate adsorption was enhanced by co-adsorption of calcium, but calcium formed surface precipitates such as calcium carbonate. These surface precipitates affected the adsorbent reusability and needed to be removed by implementing an acid wash step. The insights from this study are useful in designing optimal regeneration procedures and improving the lifetime of phosphate adsorbents used for wastewater effluent polishing.